Product Code: | EOT-0016R |
Availability: | In Stock |
Intel Dual Port Gigabit NIC Desktop/Server PCI Express PCIe x1 LAN Card Low Profile Network Adapter
-PCI Express x1 (single Lane) Interface
-Low Profile Bracket Included
-Regular Profile Bracket Included
Based on Intel 82575 Chiset this PCI EXpress x1 netowrk adapter card is compatible with PCI Express by 8, X16 channels at the same time. The network card performance is optimized to improve, make the system I/O no longer the bottleneck of network application. The adapter card can be bundled together in groups achieve fault tolerance and the expansion of the network bandwidth, a real-time automatic detection and realizes the communication will come from fault ports routing continued to run to the other members in the group communication in order to realize the continuous communication.
The adapter card has integrated hardware acceleration, able to perform the TCP/UDP/IP checksum points and TCP segmentation tasks. Host processing techniques can be divided into accelerator, host processing technology can be divided into the accelerator, the release of the CPU resource utilization, to make more CPU resources to deal with other applications. The adapter card is to deploy multiple network and on the high performance server deployment key an ideal solution for network application and environment.
82575EB is double port server adapter card, most can achieve dual port on the network card in full-duplex mode to run high performance work at the same time, thus improve the network performance, but also can save valuable PCI Express slot resources. In addition, the design of the server adapter card in a multiprocessor system can show excellent performance. When the receiver with Microsoft to extend or in Linux scalable I/O when used together, the dual port adapter card can effectively balance multiple central processing unit (CPU) between the network load.
Intel 82575 network card features:
• copper gigabit Ethernet channel support individual gigabit Ethernet (1000 base-t), high speed Ethernet (100 base - Tx) and Ethernet (10 base-t)
Three kinds of speed: 1000 Mbps (1000 base-t), 100 Mbps (100 base - Tx) and 10 Mbps (10 base-t)
• in 1 GBPS full-duplex and 100/10 Mbps between simplex or full duplex, implement N-way adaptive automatic detection and switch
• RJ-45 female connector
Standard support PCI Express, host interface specification revision 1.1 and above
, high performance, high reliability and low power consumption of the Intel 82575 double integrated MAC + PHY (media access controller and the physical interface transceiver and SERDES chip controller
Each channel, large packet buffer capacity, can reduce CPU usage
• hardware acceleration can be divided into the mission of the host processor. Controller can be divided into load TCP/UDP/IP checksum calculation and TCP segmentation tasks
• link aggregation and load balancing:
Depending on the switch: 802.3 AD (LACP), Generic Trunking (GEC/FEC)
, independent of the switch and the NIC
• failover
• prioritization - 802.1 p layer 2 priority encoding
Virtual local area network (LAN), 802.1 q VLAN tagging
Large frame (9.5 KB)
• 802 x flow control
SNMP MIB II, statistics, Ethernet like MIB and Ethernet MIB (802.3 z, Clause 30)
• links/activities/speed state of LED lights
RJ45 gigabit server nic host interface:
• • PCI-e X1channel, at the same time, compatible with PCI - e by 8, PCI - e X16 slot
Narrow edition adapter card (can support both 2 u, 3 u case)
Operating system supported:
DOS, Novell ODI
Windows 2000
Windows XP 32 - bit (64 - bit)
Windows Server 2003 32 - bit (64 - bit)
Windows Vista 32 - bit (64 - bit)
Windows 7 32 - bit (64 - bit)
Windows 8 (64 - bit)
Windows Server 2008 32 - bit (64 - bit)
Windows Server 2008 R2 (64 - bit)
Windows Server 2012
Windows Server 2012 R2
Novell Netware 5. X, 6. X
Linux 2.4 series kernel and 2.6 x and 3 x
Most FreeBSD 7 x and version
OS version 8 and higher
SCO Open Server
UnixWare/OpenUnix 8
Sun Solaris x86
OS Independent
RJ45 gigabit nic technical specifications - (1000 base-t)
The IEEE standards/network topology:
Gigabit Ethernet, 1000 base-t
High speed Ethernet, 100 base - TX
10 base-t Ethernet
Full duplex/simplex:
In all running speed under the support of simplex and full-duplex operation
Adaptive:
Between the full duplex and simplex, and rate of 10 MB/s, 100 MB/s and duplex realize adaptive between 1000 MB/s
Data transfer rate:
Simplex mode, each port transfer rate of 1000 MBPS, 100 MBPS and 10 Mbit/s college
Full duplex mode, each port at a rate of 2000 MBPS, 200 MBPS and 20 Mbit/s
Cable and operating range:
10 base-t Category 3, 4 or 5 longest distance is 100 m
100 base - Tx Category 5 longest distance is 100 m
1000 base-t Category 5 e the longest distance is 100 m
RJ45 gigabit server nic general technical specifications
Interface standards:
PCI Express V1.1
Circuit board size:
Short external card: 167.64 mm X 68.91 mm (6.60 "X 2.713")
PCI Express interface card type:
X4 channel, at the same time compatible by 8 / X16
PCI Express voltage:
+ 3.3 V + / - 9%
The + 12 v + / - 8%
Weight:
80 gr (2.822 oz.)
Power consumption:
When 3.3 V 3.927 W, 1.19 A:
Typically, all ports run rate is 1000 mbit/s.
When 3.3 V 1.716 W, 0.52 A:
Typically, all ports run rate is 100 mbit/s.
When 3.3 V 1.518 W, 0.46 A:
Typically, all ports run rate is 10 mbit/s.
When 3.3 V 1.221 W, 0.37 A:
Typically, no links to all ports
Controller:
Intel 82575 exabytes
Support:
Metal stents: high/skinny
Working humidity:
0% - 0%, without condensation
Working temperature:
0 ° C - 50 ° C (32 ° F to 122 ° F)
Storage temperature:
- 20 ° C to 65 ° C (4 ° F to 149 ° F)
The average time between failures (MTBF) :
In 292,
According to the Telcordia college * SR - 332-1 Issue
College environmental conditions - GB (grounding, fixed, controlled). Environmental temperature 25 ° C. In theory, the temperature of the interface card parts is higher than system environment temperature 15 ℃
RJ45 gigabit nic LEDs light server
LEDs:
Match each port are independent of the LED lamp
The Link/Act (1000, 100 or 10 MB/s) Link lights up, when flashing (green)
100: link at a speed of 100 MB/s on (green)
1000: link at a speed of 1000 MB/s on (green)
The location of the LED:
On the PCB, can observe through the hole of the metallic stent
Connector:
Two shielding RJ - 45